BGSJY - ABLEBOND 190-2
- MSDS: BGSJY
- Manufacturer: ABLESTIK LABORATORIES
- Product Name: ABLEBOND 190-2
- National Stock Number: 8040-00-148-7093
Product Identification
Product ID:ABLEBOND 190-2
MSDS Date:12/27/1988
FSC:8040
NIIN:00-148-7093
MSDS Number: BGSJY
Responsible Party
GARDENA, CA 90248
Emergency Phone: 213-532-9341
Info Phone: 213-532-9341
Cage: 9V874
Contractor
Telephone: 310-764-4600
Cage: 21109
Ingredients
SILVER (SARA III)
CAS: 7440-22-4
RTECS: VW3500000
Fraction By Weight: <5%
OSHA PEL 0.01 MG/M3
ACGIH TLV: 0.1 MG/M3; 9192
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
COPPER (SARA III)
CAS: 7440-50-8
RTECS: GL5325000
Fraction By Weight: >70%
OSHA PEL 0.1MG/M3 FUME/1 DUST
ACGIH TLV: 0.2MG/M3 FUME; 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
RTV SILICONE RESIN
METHYL ALCOHOL (METHANOL) (SARA III)
CAS: 67-56-1
RTECS: PC1400000
OSHA PEL S,200PPM/250STEL
ACGIH TLV: S,200PPM/250STEL; 93
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MFR REPORTS VERY LITTLE IN THE WAY OF
HEALTH INFORMATION. THEY REPORT "INFORMATION NOT AVAILABLE" FOR ALL
EXPOSURES EXCEPT EYE/SKIN CONTACT WHERE "MAY CAUSE IRRITATION" IS
REPORTED.
Effects of Overexposure:IRRITATION ON CONTACT WITH EYE/SKIN.
Medical Cond Aggravated by Exposure:NONE REPORTED
First Aid
First Aid:EYE:FLUSH WITH WATER 15 MIN. SKIN:WASH IMMEDIATELY WITH SOAP
& WATER. INHALED:REMOVE TO FRESH AIR. IF ANY SYMPTOMS PERSIST,ARE
SEVERE OR PRODUCT IS INGESTED,GET IMMEDIATE MEDICAL CARE.
Fire Fighting
Flash Point Method:OC
Flash Point:>250F/121C
Extinguishing Media:CARBON DIOXIDE,FOAM,DRY CHEMICAL
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:WIPE UP WITH TOWELING. CLEAN AREA WITH
SOLVENT. TAKE PROPER PRECAUTIONS WHEN USING SOLVENT (FIRE,ETC.).
Neutralizing Agent:NONE
Handling
Handling and Storage Precautions:STORE IN COOL,DRY AREA. PRODUCT CURES
IN PRESENCE OF MOISTURE. STORE TIGHTLY CLOSED. KEEP DRY.
Other Precautions:VENT CURING OVENS OUTDOORS. SILVER & COPPER ARE NOT
HAZARDOUS WHEN INCAPSULATED INTO THE RESIN. SANDING,GRINDING,SAWING
ETC. RELEASE THEM. TAKE PROPER PRECAUTIONS TO KEEP EXPOSURE BELOW
TLV/PEL.
Exposure Controls
Respiratory Protection:USE NIOSH RESPIRATOR FOR TOXIC DUSTS WHEN
CUTTING,ETC. PRODUCES EXPOSURES ABOVE TLV/PEL.
Ventilation:USE LOCAL EXHAUST AS NEEDED TO MAINTAIN EXPOSURE BELOW
TLV/PEL.
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES WITH SIDE SHIELDS
Other Protective Equipment:CLOTHING TO PREVENT SKIN CONTACT
Work Hygienic Practices:USE GOOD CHEMICAL HYGIENE PRACTICE. AVOID
CONTACT WHEREVER POSSIBLE.
Supplemental Safety and Health
Chemical Properties
HCC:N1
Spec Gravity:3.9
Solubility in Water:NIL
Appearance and Odor:GREY PASTE,SWEET ODOR
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:WATER,ACIDS
Hazardous Decomposition Products:SILICON DIOXIDE,CARBON
DIOXIDE,METHANOL
Disposal
Waste Disposal Methods:DISPOSE I/A/W FEDERAL,STATE,LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.